2J8750BGF Antenna

3-in-1 Cellular/LTE, 2.4/5.0 GHz ISM and GNSS ‘Shark Fin’ Antenna

General specification
Mounting Screw Mount
Dimensions (mm) 102 × 63 × 63
Operating temperature -40 °C to +85 °C
Certificates IP67, IP69, IK09
Standard colors
Get Datasheet
Product added to cart

Key Features

  • Screw Mount
  • Ground Plane Dependent
  • Customizable Cable and Connector
  • Anti-Rotation Mechanism
  • Certificates: IP67, IP69, IK09
  • Antenna and electrical specifications

    connection 1


    Standards 2G,3G and 4G
    Frequency 698-960, 1710-2170, 2500-2700
    VSWR ~1.9:1, ~1.7:1, ~1.4:1
    Efficiency (%) ~52.3, ~40.7, ~46.7
    Peak Gain (dBi) ~1.2, ~2.0, ~3.1
    Impedance (Ohm) 50
    Polarisation Linear
    Max. Input Power (W) 25
    connection 2

    2.4/5.0 GHz ISM

    Standards WiFi, BT, ZigBee, ISM
    Frequency 2410-2490, 4920-5925
    VSWR ~1.2:1, ~1.3:1
    Efficiency (%) ~48.8, ~28.0
    Peak Gain (dBi) ~4.1, ~2.5
    Impedance (Ohm) 50
    Polarisation Linear
    Max. Input Power (W) 25
    connection 3


    Standards GPS/QZSS/Galileo/GLONASS
    Frequency 1575.42, 1598-1606
    VSWR <=1.4:1
    Impedance (Ohm) 50
    Polarisation RHCP
    Active Gain (dB) 28 @ 2.7 V
    Voltage (V) 1.5 - 3.6
    Noise Figure (dB) 1.5 Typ
    Current Consumption (mA) 9 Typ
    Power Consumption (mW) 24.3 Typ
    Saw Filter Type Pre-Filter
    ESD Protection (kV) 2

    Antenna description

    2J8750BGF “The Mako Series”


    3-in-1 Cellular/LTE, 2.4/5.0 GHz ISM and GNSS ‘Shark Fin’ Antenna


    The Next Generation 3-in-1 Antenna Reaching Global Connectivity With Excellence

    The Cellular/LTE, 2.4/5.0 GHz, ISM and GNSS Screw Mount Antenna (2J8750BGF) is a 3-in-1 ‘Shark Fin’, high-performance antenna ideal for powerful global connection on the move. The 2J8750BGF outperforms any competitor by offering 4G, LTE, 2G, 3G, WiFi, Bluetooth-BT, ZigBee, GPS, QZSS, Galileo and GLONASS standards. The 2J8750BGF is highly reliable while maintaining constant global connectivity across a multitude of terrains. This makes it ideal for tracking/mapping devices, automobile navigation, commercial transportation, M2M and worldwide voice/data communications.

    The Cellular/LTE (Cable 1) is designed within 4G LTE, 3G and 2G standards. Designed with an omni-directional radiation pattern and operates within 698MHz-960MHz, 1710MHz-2170MHz and 2500MHz-2700MHz frequencies. The 2J8750BGF is tuned and calibrated to improve signal strength and allow for uninterrupted connectivity, better signal quality, and reliability while providing increased long- and short-range cellular data and video bandwidth throughput.

    The 2.4/5.0 GHz ISM (Cable 2) Antenna is ideal for WiFi, Bluetooth-BT, ZigBee and ISM standards. The 2J8750BGF WIFI antenna operates within 2410MHz-2490MHz and 4920MHz-5925MHz frequencies. Designed for reliable M2M connection ideal for low power WiFi, Bluetooth-BT, smart home and commercial devices.

    The GPS/GLONASS Antenna (Cable 3) is designed for reliable navigational connectivity within GPS, QZSS, Galileo and GLONASS standards. With a hemispherical radiation pattern, the 2J8750BGF navigation antenna operates within 1575.42MHz and 1598MHz-1606MHz frequencies. This high-quality antenna offers access to multiple satellites improving accuracy, redundancy and availability uninterrupted ideal for global automotive navigation/geolocation while moving through busy urban areas where obstructions pose a threat to connectivity and signal degradation.

    Installation / Environmental

    For external applications, the production material used is PC/ABS UV stable, protecting the antenna from temperatures between -40C and +80C. With a shark fin design, anti-rotation mechanism and ground plane independence, this screw mount antenna is easy to install with maximum durability. All three cables on the 2J8750BGF antenna have a SMA-Male standard connector, 300cm standard cable length and are fully customizable by offering additional connector types, cable lengths and cable types. 2J8750BGF is RoHS compliant with complete IP67, IP69 and IK09 certification.


    Typical applications

    - Automotive connectivity
    - Multimedia
    - Navigation and telematics systems
    - V2V and V2X applications
    - Fleet management
    - HD video and audio streaming
    - Emergency communication




    Compatibility Standards

    LTE Cables
    - CAT 1 2 3 4 5 6 7 8 9 10 11 12

    2.4/5.0 Cables
    - WiFi, Bluetooth, BLE, ISM
    - DSRC, V2V, V2X
    - Sigfox, LoRa, ZigBee, RPMA, LPWAN

    GPS/GLO Cable
    - Galileo, QZSS, L1, E1


    Related antennas


    Explore and download all our current catalogues.

    Show Catalogues

    Become Supplier

    Offering some reliable components? Contact our purchase team.

    E-mail us

    Get Quotation

    Interested in our quality products? Contact our sales team.

    Request Quotation

    Stay Informed

    Never miss anything important with our newsletter.