Antenna and electrical specifications

connection 1

CELLULAR/4G LTE

Standards 2G,3G and 4G
Frequency 698-960, 1710-2170, 2500-2700
VSWR ~2.0:1, ~1.4:1, ~1.5:1
Efficiency (%) ~45.1, ~47.1, ~46.8
Peak Gain (dBi) ~0.9, ~3.3, ~4.4
Impedance (Ohm) 50
Polarisation Linear
Max. Input Power (W) 25
connection 2

CELLULAR/4G LTE

Standards 2G,3G and 4G
Frequency 698-960, 1710-2170, 2500-2700
VSWR ~1.9:1, ~1.4:1, ~1.5:1
Efficiency (%) ~45.1, ~46.6, ~48.2
Peak Gain (dBi) ~1.4, ~3.0, ~4.7
Impedance (Ohm) 50
Polarisation Linear
Max. Input Power (W) 25
connection 3

2.4 / 5.0 / 6.0 GHz Tri-Band WIFI 6E / WIFI 7

Standards WiFi, BT, ZigBee, ISM, SigFox, LoRa
Frequency 2410-2490, 4920-5925, 5925-7125
VSWR ~1.6:1, ~1.5:1, ~2.6:1
Efficiency (%) ~44.9, ~35.9, ~20.2
Peak Gain (dBi) ~4.8, ~3.0, ~1.8
Impedance (Ohm) 50
Polarisation Linear
Max. Input Power (W) 25
connection 4

GPS/GLONASS

Standards GPS/QZSS/Galileo/GLONASS
Frequency 1575.42, 1598-1610
VSWR <=1.5:1
Impedance (Ohm) 50
Polarisation RHCP
Active Gain (dB) 23 @ 3 V, 24 @ 5 V
Saw Filter Type Post-Filter
Voltage (V) 2.7 - 5.5
Noise Figure (dB) 1.2
Current Consumption (mA) 15 - 25
Power Consumption (mW) 40.5 - 137.5
Out of Band Rejection (dB) 32

Key Features

4-in-1 Combination Antenna
Wide band Antenna
WIFI 6E / WIFI 7 Antenna
Ground Plane Independent
698-2700 MHz 4GLTE Bands
4.7 dBi 4G LTE Peak Gain
4.8 dBi WIFI Peak Gain
High Performance
Active GNSS Antenna
24 dB GNSS Active Gain
Post Filter GNSS
GNSS Voltage Range 2.7 - 5.5 V
Heavy Duty antenna
Lightweight Plastic Base
Anti-Rotation Mounting
Customizable Cable and Connector

4GLTE Antenna Bands list

Parameters 4G LTE Antenna
Frequency (MHz) 698-960 1710-2170 2500-2700
Band (MHz) 700, 850, 900 1700, 1800, 1900, 2000, 2100 2500, 2600
4GLTE Bands B5, B6, B8, B12, B13, B14, B17,
B18, B19, B20, B26, B27, B28,
B29, B44, B67, B68, B85
B1, B2, B3, B4, B9, B10,
B25, B33, B34, B35, B36,
B37, B39, B65, B66, B70
B7, B38, B41, B69
3GCELL Bands B5, B6, B8, B12, B13, B14,
B19, B20, B26
B1, B2, B3, B4, B9, B10, B25,
B33, B34, B35, B36, B37, B39
B7, B38
2GCELL Bands 710, 750, 810T, 850, 900P,
900E, 900R
1800DCS, 1900PCS  
CDMACELL Bands BC0, BC2, BC3, BC7, BC9,
BC10, BC12, BC18, BC19
BC1, BC4, BC6, BC8,
BC14, BC15
BC13, BC16

Antenna Description

The High-Performance 4-in-1 That Offers Versatile, Lightweight and Heavy-Duty Features

The 4-in-1 Combination Antenna (2J7A50BGFc) is part of our “Medusa” series and offers superior performance with 2x 4G LTE/3G/2G, 2.4/5.0/6.0 GHz WIFI 6E / WIFI 7 ISM and GPS/GNSS connectivity. This wideband antenna facilitates wireless communications and navigation, allowing devices to remain online while moving through different coverage areas. 

This antenna features ground plane independence. Its broad range of capabilities makes it versatile for numerous applications. 

Suggested Applications

  • Terminals, Base Stations and Routers
  • Mobile Networks
  • Entertainment and Multimedia
  • Surveying
  • Defense
  • Emergency Services and Public Safety
  • Industrial, Commercial and Residential IoT / Smart Home
  • Electrical and Environmental Monitoring
  • Wearables
  • Transportation
  • Construction
  • Drone Operation
  • Industrial Automation / Robotics
  • GPS-Enabled IoT Applications (Agriculture Equipment)

Connection 1-2: Cellular 2x 4G LTE/3G/2G

Cables 1 and 2 provide connectivity to 4G LTE, 3G, and 2G networks, forming a Multiple Input Multiple Output (MIMO) setup suitable for various uses. These connections efficiently cover LTE and cellular frequencies between 698-960MHz, 1710-2170MHz, and 2500-2700MHz and feature a peak gain of 4.7 and a maximum efficiency of 48.2%. 

Connection 3: 2.4/5.0/6.0 GHz WIFI 6E / WIFI 7 ISM

Cable 3 is designed for LPWA devices that operate within WiFi, BT, ZigBee and ISM standards. The 2.4/5.0 GHz and the 6.0 GHz bands combine long-range, short-range, and very large capacity without competing with traffic from other devices or networks. This results in high bandwidth channels, improved security, less interference, and reduced network congestion, making it ideal for low-power home automation and monitoring applications that demand faster WiFi and consistent network availability. This connection offers up to ~4.2 dBi peak gains and a maximum efficiency of ~44.9%.

Connection 4: GPS/GLONASS

This cable is tuned with precision and reliability for navigational applications that operate within GPS, QZSS, Galileo, and GLONASS standards. With a hemispherical radiation pattern and right-hand circular polarization, cable 4 radiates on all planes and maximizes connectivity by avoiding conflict with propagating signals, penetrating obstructions, reducing dead spots, boosting throughput, and improving resistance to signal degradation caused by inclement weather conditions. Cable 4 can maintain an active peak gain of 23 dBi @ 3V/ 24 dBi @ 5V. The SAW post-filter blocks inadequate frequencies with an out-of-band rejection of ~32 dB across the 1575 – 1602 MHz bands.

Installation / Environmental

Measuring only Ø 96 x H 90 mm, the 2J7A50BGFc is protected with a lightweight, robust, and heavy-duty housing made with high-quality acrylonitrile styrene acrylate (ASA) UV stable material, known for its thermal resistant properties and a plastic antenna base. This solution comes with a screw mount antenna that can be installed indoors or outdoors. It comes with an anti-rotation mounting technology. All cables on the 2J7A50BGFc antenna have an SMA-Male standard connector, a 300cm standard LL195 cable length for the Cellular and WiFi connections, and a LL100 cable for the GPS connection. All cables and connectors are fully customizable to specific requirements. The IP67 and IP69 ingress ratings provide this compact antenna with maximum protection against dust and water penetration, while the IK09 rating adds an extra level of anti-vandal security with high impact resistance.

2J Antennas supports the health of our environment and manufactures all our products without hazardous materials, making us fully REACH and RoHS compliant.

Applications

Mobile Networks Cellular Networks Machine Control Wearables Asset Tracking and Security Civil Applications Automotive Telecommunication Broadband Communications Wireless Security System Energy Monitoring Air Quality and Pollution Monitoring Telemetry / Telematics Entertainment and Multimedia IoT - Internet of Things Smart Home Logistics and Shipping Smart Cities Industrial IoT & Monitoring Smart Farming Fleet Management Medical and Healthcare Autonomous Driving Drone Operation Security and Surveillance Gaming and Virtual Reality Mission Critical Communications Transportation GIS - Geographic Information System Cartographic Hazard Mitigation Automation Agriculture Construction Mining Industry Unmanned Vehicles Surveying Defense Aerial Photogrammetry Logistics Location Based Services Road Applications Rail Applications Maritime Applications Autonomous Applications Mobile Applications Data Processing Remote Monitoring and Control Smart Metering Smart Lighting Smart Parking and Vehicle Control Infrastructure Management Fire Detection & Management Waste Management Water Metering & Management Government & Public Safety Building Control Manufacturing Video Streaming Smart Grid Private Cellular Networks Electricity Metering & Management Resources Management Digital Signage Routers, Gateways & Data Terminals Utilities First Responder Fleets Fire Departments C-V2X - Cellular Vehicle to Everything Retail Services Marine Home Applications Public Wi-Fi Short-Range Personal Area Networks RFID devices V2X - Vehicle to Everything Aviation Applications Satellite Realtime Navigation MIMO Device Connectivity High-Density Environments MU-MIMO Connectivity

Related mounting brackets

Catalogues

Explore and download all our current catalogues.

Show Catalogues

Become Supplier

Offering some reliable components? Contact our purchase team.

Contact us

Get Quotation

Interested in our quality products? Contact our sales team.

Request Quotation

Stay Informed

Never miss anything important with our newsletter.